Rep: 13
2
Just replaced iphone 6s battery with ifixit iphone 6s battery replacement kit and guide. I followed the instructions including draining battery and charging it fully. The iphone shuts down at about 80%. It will not turn on until it is plugged back in to a power outlet with the apple charging cable.
Es esta una buena pregunta?
Rep: 441
4
9
its possible that the battery just needs to be calibrated but after a few charging cycles and the problem is still there i would consider contacting Ifixit and letting them know and they might send a replacement battery.
Fue útil esta respuesta?
When you say that the battery just needs to be calibrated, do you mean just try to drain the battery down to at least 10% or lower then charge 100% and do this a few times. I just replaced the battery last night and only calibrated it once.
Charge the battery fully and the discharge it completely. do this a few times and if the problem still persists then i would contact Ifixit for possibly a replacement battery.
If recalibrating the battery does not work, try restoring the iphone as new. If you are still having problems with the phone after restore, I would try contacting iFixit and see if they will give you a replacement battery.
Fue útil esta respuesta?
Rep: 13
2
I have erased all contents and setting on the iPhone and restored back to factory settings. The iPhone was still shutting off and I needed to plug it back in to start it again. I checked the battery with Coconut Battery and it still read that it is functioning well and fully charged. I then tried to see if the phone would power off if I kept the screen on and started the stopwatch. It stayed on. I then realized I needed to turn off auto-lock. Settings>Display & Brightness>Auto-Lock>Never. So far this seems to work. I was so frustrated and almost opted to just buy a new iPhone, hopefully this resolves the problem for good.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 1,209
