Saltar al contenido principal

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 691 Ver todo

Won't load, backscreen with apple logo after screen replacement

Hi, after i had replaced the screen on my SE the apple logo shows and the device keeps restarting but can't load, I can put it in "Connect to itunes" mode but can't update or reset error 9 ):

Update (12/22/2017)

I have tried the orginal screen I also took the hole screen assembly with camera from another working SE and the device still will not boot up

¡Contestado! View the answer I have this problem too

Is this a good question?

Puntuación 0
Añadir un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

1 Respuesta

Solución elegida

The first thing to try is to re-install the original screen to see if the problem persists. You may have a defective screen that is causing this problem. Error 9 can also be caused by a damaged Lightning cable so you may want to try another cable or test the cable you have on another device.

¿Ha sido útil esta respuesta?

Puntuación 1
Añadir un comentario

Add your answer

Mads Rasmussen will be eternally grateful.
Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

Global: 32