Repara tus cosas Comunidad Tienda

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 1049 Ver todo

Opciones

Smoking battery while replacing. How to deal with it?

Hey guys,

I was replacing the battery of my iPhone SE. The glue bands got cut, so in the process I accidentally punctured the battery several times.

On my ignorance (I underestimated the procedures, I'm terribly sorry about this, never again!!!) I bended a little bit the battery to got access to the glue bands underneath it with the tweezers. So, it flashed out of nowhere and smoked a little bit. I assume the lithium is extremely reactive to humidity, that's why the

At this point, I left the iPhone on the work surface as is, but I truly don't know how to deal with this.

Thanks in advance for your answer, guys!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

well you are lucky the phone could have went on fire, realistically I wouldn't have that battery in my house.

once the battery stops smoking you can try again but to be warned you have to be very carful with lithium polymer batteries.

if you have a metal sink id leave it in there or outside. In my tech department we use a safe for punctured batteries so its smothered.

if it feels hot while your working on it put it down. for future reference there are pull tabs on the glue and if you break those usally a low heat hairdryer works to soften the glue before removing the battery.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Añadir tu respuesta

smarinpavez estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 1,497