Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1500 Ver todo
Pregunta Cerrada

iPhone cannot make or receive calls restore

I purchased an iPhone from the U.S..

I broke it to version 4.2.1 with baseband ipad

But, he does not get Sim and ID. Web and Wireless Vahblotoas not operate.

A few minutes later he shows this message:"iphone cannot make or receive calls restore from itunes"

Then after a few seconds off

On and off again.

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
1 comentario

Did you use pwnage tool?

- de

Agregar un comentario

2 Respuestas

Solución Elegida

This is because of the iPad baseband flash going wrong. You need to flash the iPhone baseband to the device again. You may also have to restore it, depending on the damage done to the phone's firmware.

The first thing you have to do is flash the iPhone baseband to it. Hopefully you can find it or have a backup. Once you do that, you may have to restore it like it's prompting. It may very well stop prompting you when you flash the iPhone baseband back.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Suffering from the same issue.

These are the list of things I have tried the problem of No IMEI,No ICCID, No Bluetooth, No Modemfirmware wifi etc. My iPhone 3GS made in 09 week 37th week has these issues. 1.I tried battery change 2.Tried restore on iTunes with custom firware 3.Flashed with iPad baseband 4. Tried fresh restore and fresh jail breaking (Unable to complete jailbreaking process as phone cannot connect to wifi, ultrasn0w from Cydia) My iPhone is on iOS 5. baseband 06.15.00 Currently, My phone has the following issues 1. No IMEI, ICCID ,WiFi , Modem firmware blank 2. Phone keeps restarting every 2 minutes. Phone was previously on iOs 4.1, I updated to iOS 5 via sn0wbreeze creating custom ipsw, hoping problem would be solved. No respite :[ Can anyone help? Can this issue be solved by replacing the baseband chip? is there any other way to solve this issue? I heard from a few people that this issue cannot be solved as of now, and that solution for this is yet to arrive. Is this true?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,858