Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

iPhone 6 with no image after screen replacement

I've been fixing iPhones for a while now with no problem. This time that I fixed it for a friend i replaced it with no problem it turned on and everything and about a week later the phone just went black but it is recognized when I connect it to iTunes. Could it be the logic board that was damaged? The phone has never been wet either.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

4 Respuestas

Solución Elegida

Have you checked the connector on the logic board? Check whether it is in good condition and clean it with Alcohol cleaning fluid to have a try.

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

I will try this thank you

- de

After trying this multiple times it finally worked

- de

Agregar un comentario

Can you verify if it's no image or no backlight? Try shining a light on the screen and see if you can see anything. If so, it could be a problem with your backlight circuit.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

There was light at first looked kind of purple but then just went out

- de

Agregar un comentario

This happend to me but on a different phone. The screen is broken talk with your seller

Fue útil esta respuesta?

Puntuación 0

1 comentario:

I thought it might be that too but i tried 3 different screens and one original that just had a crack

- de

Agregar un comentario

how you fixed your problem? please tell me, I have same problem

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Alex estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 562