Saltar al contenido principal

Primera generación de iPad de Apple con Wi-Fi, disponible con 16, 32 o 64 GB. Número de modelo A1219. Reparaciones sencillas que no requieren aplicar calor.

Preguntas 130 Ver todo

replace mother board with a raspberry pi zero w

i have a Apple ipad gen 1 and 3 not being used

is it possible to replace the mother board with a raspberry pi zero w

it has usb, bluetooth, wifi etc. it needs hdmi for output and battery

apple ouputs hdmi so it must be there

check out web site raspberrypi.org

I have this card and it work fine. it is the size of a credit card

rich

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

3 Respuestas

Solución Elegida

Likely not. You would need the schematics on how to connect the battery, Charge port, LCD, and buttons to the Raspberry Pi board. It also will not run Apple iOS, just the barebones Linux Raspberry supports.

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

He's trying to sell you his crappy boards @kaykay

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

it looks like there is a board for the charger so i need + 5 volts 2 wires

also a board for the hdmi format. 2 wires

raspberry os works fine i can use ssh and sftp commands both ways

i have both PI 3 and zero w bluetooth keyboard works fine

raspberry has a 7" display for $70 I might go that route

Richard

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Richard Schwendler estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 697