Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Lanzado el 19 de septiembre de 2014, este iPhone de pantalla de 4.7" es la versión más pequeña del iPhone 6 Plus. Identificable por los números de modelo A1549, A1586 y A1589.

Preguntas 5189 Ver todo

iPhone 6 backlight faint after drop

I got myself this iphone for a bit of training on the backlight related problems. Iphone was dropped badly with upper portion of screen smashed. I removed the shield and nothing seems visually out of order. Connector seems in order too.

With phone turned off I'm getting a steady 4.2V all along the line up to the filter and pin2. When phone is turned on, at filter TP I get a steady 14,7V wich seems a bit too much on the low side and might explain the low backlight. Should I turn my attention to U1503 and try replacing it or there are other possible components to be checked and I'm missing right now ?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

1 Respuesta

Solución Elegida

Do like jessa does on ipad rehab and change all the backlight circuitry good practice :)

Check another screen, maybe the leds in your one are damaged... failing that check the filters, diode, controller and coil like they say it's never the coil but it can be if it's lost some of its turns or is broken inside etc...

I have had some bad screens that are just a little dim and have a blueish tinge to the backlight

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

arbaman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 134