Saltar al contenido principal

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 922 Ver todo

Screen not firing up

Phone came into the shop yesterday and this could be bad

Unit seems to have no power and will not turn on

1. Tested Battery over half charged

2. Plug in charge cable Phone gets slightly warm after about 10mins charge

(normal and charging)

3. Changed Screen no change

4. Plugged into itunes itunes sees phone

5. Put on another screen (both new) no change

6. Checked main board no damage to connectors

Starting to get worried for this phone, anyone have any ideas ??

Cheers

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

have you tried power cycling the phone? pop the battery and press the power button then plug back in.

if that doesn't work you could have blown the backlight chip by changing screen without disconnecting the battery first.

rip the backlight off a working screen and shine a torch behind the lcd to confirm

Fue útil esta respuesta?

Puntuación 1

Comentarios:

Thanks for the quick answer, I new as soon as I posted this I should have mention rule 101. Isolate power source. Sorry.

Yes I did isolate the power source and i have disconnected the battery and retried to start the phone to no avail

- de

no problem, next step is to tear the black backlight off the back of the screen you won't damage anything so don't be scared then you will be left with the lcd with you can shine a torch thru and see if the lcd is working

- de

Ripped a good screen off one and no back light. Looking more like the Backlight circuit problem

- de

Agregar un comentario
Respuesta Más Útil

If iTunes recognizes your device and multiple screens don't work, then check the LCD with a flash light. If you see a dim image, then it sounds to me like you have a blown backlight circuit on the logic board. It's usually the filter but it can also be the rest of the circuit.

It's either the screen or the backlight circuit on the logic board. If you have access to a known-good screen, try that first. Otherwise, you will need to find a reputable shop that does micro-soldering.

Fue útil esta respuesta?

Puntuación 5

Comentarios:

Thank you for your time, great help. That is why I like this forum. Working alone in a shop you don't always have the answers and it is great to "put it out there" To this great pool of knowledge

Thank you again

- de

My pleasure!

if this answer solved your problem, please “Choose as Solution”. This allows people in the future to understand which answers helped solve the problem and adds value to the site. - Thanks

- de

Agregar un comentario

Añadir tu respuesta

charlieclemett estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 63