Saltar al contenido principal

Modelo A1136 / disco duro de 30, 60 u 80 GB / frente de plástico negro o blanco

Preguntas 797 Ver todo

The Brown cable hold down breaks when you remove it.

The brown connector breaks as soon as you pull it straight out to take the wire out in step 3. It has two little arms with hooks and one arm is now gone. How do I reassemble my ipod (reverse step 3) since you didn't supply a new brown connector with the new cable? This should come with the cable assemble.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

I can tell you of hand without exactly knowing which cable or part on the iPod video you replaced, that none of the cables or parts come with replacement clips. All the connectors have PERMANENT clips that push on the cable and thus cause the connection. You can try to find a clip from another logic board of same kind and see if you can replace it. This is very tedious and will require some good magnification and dexterity. Personally I think you may have to replace the logic board. But give us some more info and we will see if we can help you further. Good luck.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Joseph Hart estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 467