Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Camera not sharp after case replacement

I replaced the housing of my iPhone 6, now my back camera isnt focusing anymore.

So I thought I broke the camera, I replaced the camera with a new one but it is still the same issue.

The images are blurred, can anyone help me with this?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
1 comentario

I will open my phone tomorrow and let you guys know, thanks!

- de

Agregar un comentario

4 Respuestas

Solución Elegida

I would check out the "lens" in the housing. It may be dirty or have a fingerprint on it. You will need to clean it with either a magic pen or some IPA and a clean q-tip.

Fue útil esta respuesta?

Puntuación 1

2 comentarios:

It is a custom housing and I believe it doesnt have a lens in the housing.

Could that be the problem?

- de

If there was no lens, then it wouldn't be blurry unless it was the camera itself that was the issue.

- de

Agregar un comentario

Hi,

Custom or non original housings tend to have a low quality plastic lens.

This would need removing and replaced with a glass lens.

Or there may be dirt on the lens itself.

Fue útil esta respuesta?

Puntuación 1

2 comentarios:

Or a foil of protective nylon.

- de

Or that also!

- de

Agregar un comentario

Cleaning the lens fixed the issue.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

If the lens is missing it causes a blurry picture.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Zackito estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 330