Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1481 Ver todo

replaced broken screen and display is dim

I replaced my broken a screen and it works but it is extremely dim. I went to brightness, cranked it up, but it did not change it. Since i bought two 3GS screens, i installed the second one, but had the same results.

Anyone have an idea?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1

Comentarios:

by screen do you mean just the front display glass or entire display including lcd

- de

Agregar un comentario

5 Respuestas

Solución Elegida

My suggestion here is that you do not have the backlight working. Easy for me to guess since I am not looking at your phone. Check out this site and see if it makes sense for your to fix your phone the way it is described. I mean you would have to be pretty unlucky to buy nothing but broken screens. Possible? yes but very unlikely. Just my 2 cents...here is the site http://blog.techsick.com/guides-tutorial...

Fue útil esta respuesta?

Puntuación 1

Comentarios:

i agree with your 2 cents

- de

ah...it is blown. the people before me did try to install a 3G screen into the 3GS phone....no way for me to fix it at this point.

thanks for the help all

- de

Agregar un comentario
Respuesta Más Útil

Are the screens original Apple replacement ones, or cheap generic screens? I'm wondering if that may be the trouble. Do you have any screen, cracked or otherwise, that is original which you could temporarily connect and will give an indication of brightness level? You could then confirm that it isn't another hardware issue within the phone, but is actually the new screen.

Fue útil esta respuesta?

Puntuación 1

Comentarios:

the display assemblies were purchased via IFixit

- de

oh..and i have put the original cracked screen back in and the same problem exists.

- de

Agregar un comentario

hmmm....make sure your lcd is connected properly...connection number 2....try a hard reboot by holding the top and bottom button together for like 10 secs

Fue útil esta respuesta?

Puntuación 0

Comentarios:

i have already done that with two new screens? any other options?

- de

Agregar un comentario

had the same problem. tried everything but checked the settings and saw that the settings were turned down. turn it all the way up and see what you find.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Water Damage to the logic board will cause the back light on the LCD to function improperly. Or you might have two broken LCD need to try an LCD you know is working. Good Luck

"That's a bummer man! It's uh...it's a bummer." -The Dude

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

rdt estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 3,206