Apple's 2016 revision to their laptop lineup targeted at professional users. Features a 15-inch, 2880-by-1800 Retina display, quad-core Intel Core i7, 256 GB / 512 GB /1 TB / 2TB storage options, 16 GB RAM, and a keyboard equipped with a Touch Bar. Released November 2016. Features Model A1707.

Preguntas 76 Ver todo

Is it possible to change aluminum parts?

A back aluminum part that covers diplay

An aluminum body

A back of aluminum body

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1


Not the same model stated,

But I needed bottom cover


MBP 13" - Amazon had China copies -

But reviews were not impressed.

I did not pursue EBay or putting

Request for one at EBay, which can

be done.

Then get notice when it's offered.

Amazon 13" bottom cover - roughly $50.


Agregar un comentario

1 Respuesta

Solución Elegida

Bottom lid, easy

Main body, very difficult and you need to buy new touch bar module as well. New battery and keyboard recommended but if you are careful and not cared about quality you can reuse them

Display cover, not going to happen ever

Fue útil esta respuesta?

Calificación 3


Definitely not worth it. I think the touch bar/touch ID is paired to the logic board like iPhones as well, so it may not be possible, it is difficult to say at this point until more are available to work on.


Touch ID is a separate module from Touch Bar. Touch Bar is absolutely not repairable but you can pull the Touch ID button off and put into a new case.


Good to know, only worked on 1 of these so far, so not too familiar at the moment :)


Agregar un comentario

Añadir tu respuesta

trubnikov.artem estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 9

Todo El Tiempo: 207