Repara tus cosas Comunidad Tienda

Lanzado el 19 de septiembre de 2014, este iPhone de pantalla de 5.5" es la versión más grande del iPhone 6.

Preguntas 1525 Ver todo

Opciones

touch id not working after just opening it, original button and lcd

Hello

My touch id of iPhone 6 plus isn't working anymore, had to replace the camera, but now just closing the lcd isn't working anymore (id touch) have not touched lcd or id touch button, the only wrong thing i did was not to take off battery before taking off lcd

what can i do? it says try later, no error on itunes (tried every thing)

Can I contact apple or just have to wait few days? (my friend who have a shop told me this)

This was not my first reparing

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

4 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Did you disconnect the battery? If not do a hard reset on the phone(hold down power and home button for about 10 seconds). You had to have unplugged the home button/touch id(through the interconnect cable) to replace the camera. Without a reboot phones dont recognize the touch id after unplugging and replugging it in.

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

- de

Agregar un comentario

Opciones

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

do you think if i change backplate with long flex, will start working again?

Fue útil esta respuesta?

Sí No
Puntuación 0

3 comentarios:

Thats pretty much the only other part that can be replaced and still keep the touch id at this point.

- de

ok thanks, gonna try it

- de

Hello, did you replaced long flex cable of home button? Did the Touch ID worked fine again?

thanks.

- de

Agregar un comentario

Opciones

look under the LCD is a metal plate under that metal plate is a flex cable that connects home button with motherboard, change the flex cabble and try again

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

madaraus estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 96