Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

iPhone not charging, "this accessory may not be supported."

I have this iphone 6 motherboard that works almost fine, exept it wan't recognise the charging cable, and the message pops up: "This accessory may not be supported".

I have tried "millions" of different cabels, originals too, but it dosn't work.

I can charge it by turning the phone of while it is plugged in, but that is no good...

I have tried with diferent ports too, dosn't make a difference.

I have tried updating/restorering the phone, didn't help.

Could it be fixed by jailbreaking the phone and mabye run it on an older ios?

Could it be the charging chip (U2)?

Thanks for your help :)

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Respuesta Más Útil

one thing that may cause your iPhone to reject your charging cable is that your charging socket/hole/connector may be full of dirt, like lint, or dust. a good way to clean this out is with a toothpick, carefully. alternate scraping the dirt out and blowing in the charger port to loosen the dirt. dirt in the charger hole may cause a poor connection, including the error message

Fue útil esta respuesta?

Puntuación 1

1 comentario:

I tried conecting a completly new socket to the motherboard, didn't help.

The problem must be software related or some hardware failure on the motherboard

- de

Agregar un comentario

Try a DFU mode restore, if not then it would probably be the tristar chip.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

DFU restore didn't help ..

Guess I'll try replacing the chip then.

- de

Agregar un comentario

Añadir tu respuesta

anthonriis estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 9,852