Saltar al contenido principal

El iPhone 5s de Apple fue anunciado el 10 de Septiembre, 2013. La reparación de este dispositivo es similar a los modelos anteriores y requiere destornilladores y herramientas de palanca. Disponible como GSM o CDMA /16, 32, o 64 GB / Plata, Oro, y Gris Espacial.

Preguntas 3530 Ver todo

Cant screw down the LCD flex bracket

Hello, i recently purchased a used iphone 5S 64GB. It has clearly been fixed on before, by someone not doing a professional job. The two lower screw holders (I am not sure what it is called) on the mainboard is missing. So i can't thighten the 1,2 mm and the 1,3 mm. Only the two upper ones. Does anyone have any idea what i can do? I am not into microsoldering unfortunately. The good thing is that the phone is 64GB, and the motherboard works just fine.

Is it risky to just keep the plate in place with the two upper screws, or is there other things i can do? Thanks! I could maybe try to use superglue to keep the srew holders in place, but i do not think that is a long term solution.

I will provide a picture:

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

It's not idea but I wouldn't use glue as it might get into your chip below and kill your phone. Or it probably won't stick for long.

I've seen many phones where previous dodgy repairers have not put the shield plate back on at all and the phone still works.

2 screws are better than no plate at all.

Ultimately try to get a professional to solder the 2 holders back on the housing.

Fue útil esta respuesta?

Puntuación 1

3 comentarios:

Thanks Amir, will consider trying with only two screws. Also check prices for the soldering. Will see if I get more answers first. Thanks!

- de

2 screws are fine. They are not ground points, just fasteners.

Please don't super glue your phone.

- de

@joshw I won't ;)

- de

Agregar un comentario
Respuesta Más Útil

Return the device. You're lucky if this device can work at all.

Lower screw post damage usually involves PCB damage underneath, usually such damage is beyond repair. Try the display without screws, if it does not work, ask for a refund.

Fue útil esta respuesta?

Puntuación 3

2 comentarios:

It have mounted a new screen, with only the two upper screws holding the plate. It is working completely fine, so i am not sure what to do.

- de

So just leave it be. Some people leave the bracket plate uninstalled and most times work just fine. Avoid dropping the phone though.

- de

Agregar un comentario

Añadir tu respuesta

Iver estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 73