White flashing light does not pair.

I got these power beats 2 and they don't pair with any of my device. It keeps blinking a white light and never pairs. I tried resetting it . It didn't work. I went to the apple service centre but they said nothing can be done but they would give a replacement for that i have to pay $110. Is there a way to get it fixed.

Please!!

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario
Reparte el espíritu de reparación esta Navidad
Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
Reparte el espíritu de reparación esta Navidad
Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12

1 Respuesta

Solución Elegida

Hi,

Do the headphones appear in your 'device's' BT list?

If so and it still doesn't pair have you tried 'forgetting' the device in your 'device's' BT list and then trying to pair it again?

Apologies if you have tried this, just double checking.

If it doesn't work check to see if there is a firmware update available that you can load, that hopefully might resolve the problem by correcting any corrupted data, if that is the problem. This is only a suggestion and may not work if the headphones already have the latest firmware version installed and a reload of the same version is not allowed, only updates or if there are no updates to be had. I do not have a set to try it and find out.

Here is a link that describes what to do.

https://www.beatsbydre.com/support/how-t...

Fue útil esta respuesta?

Calificación 2

Comentarios:

Hi, It does not appear in the bluetooth list. It does not pair on any device. its up to date and still doesnt work

por

Hi

If it doesn't appear then the BT is not functioning. Either due to hardware or software.

Try holding right next to the device in case it is an antenna problem.

Other than that you'll have to open it up and hope something obvious stands out.

por

Mine is showing up on my device but won't connect.

por

It's most likely a short in the cable, meaning its dead.

por

Took mine apart left side took board out moved around reset and forgot device from my phone started working again..

por

Agregar un comentario

Añadir tu respuesta

Aadam estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 43

Últimos 7 Días: 329

Últimos 30 Días: 1,545

Todo El Tiempo: 69,154