Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1500 Ver todo

Internal connector 7 broken.

Guys, I really need your help! I was trying to glue smashed connector 7 to the board connection and made it bad. Now I have absolutely no signal and have no idea what to do next. Please help me with some kind of fix. Both parts of that connection are BAD now :(

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

3 Respuestas

Solución Elegida

Try taking a small thin copper wire with a small amount of solder on each end. Place it directly in the center of the logic board 7 female connection. Heat up the wire so the solder makes a solid connection on the logic board. Then apply generous amount of solder on the male 7 connection coming off the dock. Connect the two wires and you should get full reception on your antenna.

Good Luck.

“I am so clever that sometimes I don't understand a single word of what I am saying.” Oscar Wilde.

Fue útil esta respuesta?

Puntuación 3

3 comentarios:

The 7 connection goes to the wireless antenna sticker that resides on the back of the 3GS dock assembly. You can order the antenna on the net for cheap and iFixit has plenty of content on how to replace it.

- de

Parker, thanks for your help! I'll try to do it topmorrow morning. I'll reportto you on the result...

- de

sounds like a good fix-should work.

- de

Agregar un comentario
La respuesta fue originalmente a otra pregunta.

antenna flex connection.has small gold prong on right side to connect to bezel

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

I don't know for sure, but I always thought that ribbon was related to the internal compass...

- de

Agregar un comentario
La respuesta fue originalmente a otra pregunta.

The 7 connection goes to the wireless antenna sticker that resides on the back of the 3GS dock assembly. You can order the antenna on the net for cheap and iFixit has plenty of content on how to replace it.

Try taking a small thin copper wire with a small amount of solder on each end. Place it directly in the center of the logic board 7 female connection. Heat up the wire so the solder makes a solid connection on the logic board. Then apply generous amount of solder on the male 7 connection coming off the dock. Connect the two wires and you should get full reception on your antenna.

Good Luck.

“I am so clever that sometimes I don't understand a single word of what I am saying.” Oscar Wilde.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Felix estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,809