Skip to main content

My digitizer is dimming after I repaired my screen?

After I replaced my glass screen the digitizer has become dim. I can see the apple sign when I turn it on. And when I try to turn it off I can see the X button where you would exit powering off. What do I do?

¡Contestado! View the answer I have this problem too

Is this a good question?

Puntuación 0

Comentarios:

I have to look at the screen in the light. What is the back light? Or where is it.

by

Añadir un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

1 Respuesta

Solución elegida

How dim is the screen? Make sure the brightness is turned up. Make sure the connector are properly connected. You could try a soft reset. Does the LCD display an image when it goes to the home screen, or do you have to be in light or turn the iPad a certain way to see what's on the display, if that's the case the black light fuse may need to be replaced.

Was this answer helpful?

Puntuación 2

Comentarios:

Cues it's the back light than. Because I have to look in the light to see the screen. Where would the back light be at?

by

Ooh it's the backlight diode filter

by

@theimedic, you should turn that into an answer.

by

Añadir un comentario

Add your answer

Sharla Coleman will be eternally grateful.
Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

Global: 29