Small Blue Tinted Plastic Piece Fell Out While Disassembling iPhone 6

Question

iPhone 6

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

gybeho @gybeho

Rep: 43

3

Publicado: 11 de ene. de 2017

Opciones

Small Blue Tinted Plastic Piece Fell Out While Disassembling iPhone 6

Replaced the digitizer screen successfully on an iPhone 6, however, during reassembly a small blue tinted piece of plastic fell out, and I don't know where it belongs. It is rectangular, has a corner cut off, and has two small holes in it. It is transparent, but tinted blue. It is pretty small, maybe 3 mm long or so. Might this missing piece have anything to do with the fact that the FF camera has a little bit of a halo on the image?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

3 Respuestas

Josh W @joshw Rep: 12.1mil 11 28 6 · Answer 1 · 2017-01-12T10:01:53-07:00

Respuesta Más Útil

Josh W @joshw

Rep: 12.1mil

11

28

6

Publicado: 12 de ene. de 2017

Opciones

It sounds like the plastic piece that protects the glue where the microphone sticks on.

Fue útil esta respuesta?

Sí No

Puntuación 2

Agregar un comentario

Darcy Patko @gomobilerepair Rep: 454 GoMobile Repair 3 1 · Answer 2 · 2017-01-11T13:51:37-07:00

Darcy Patko @gomobilerepair

Rep: 454

GoMobile Repair

3

1

Publicado: 11 de ene. de 2017

Opciones

It must have been a leftover piece of protective film from the assembly process. There are not supposed to be any pieces of blue film inside of the iPhone 6.

The halo on your front facing camera likely means there was damage to it or there is some dirt or residue on the glass screen where the opening is.

Fue útil esta respuesta?

Sí No

Puntuación 1

1 comentario:

This small piece of blue plastic does not seem like temporary protective film. It looks more like it is designed to insulate one piece from contact with another.

I also doubt there is damage to the camera. Symptoms would be more severe than a slight halo along one edge. Dirt or residue is possible, but unlikely due to the care taken during the repair. Not my first rodeo. fixing these things. My own suspicion is the camera isn't securely back in the camera retaining socket, so it's an alignment or installation issue.

12 de ene. de 2017 - de gybeho

Agregar un comentario