Saltar al contenido principal

Mediados de 2006 / número de modelo A1181 / carcasa negra o blanca / procesador Intel Core Duo de 1,83 o 2,0 GHz.

Preguntas 418 Ver todo

My A1181 just started displaying "overscan", parts of image missing.

I've got a modestly old MacBook A1181, the model that had a dozen siblings with slightly different features but shared the same designation.

Overnight, without any fuss or muss, the display went into an "overscan" mode. In other words, the image on the actual screen is only about 80 percent of the full picture and

about 20 pct is "off the edges" (numbers nominal).

I can still bring them up by sliding the window, so to speak, around, but that's very unfriendly

Any ideas how to reset this? I tried a bunch of tricks, including reinitializing the PRAM [a]. No good.

Thanks muchly.

[a] rebooting while holding down command-option-P-R

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

You could actually try to go to the service centre. They will usually know about the problem and can help you fix the laptop. This method needs a little bit of cash.

Fue útil esta respuesta?

Puntuación -1

1 comentario:

@ctaneshaa you are the service center on here. If you do not have a solution or a valid answer, consider not to answer.

- de

Agregar un comentario

Añadir tu respuesta

ifix2009 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 40