Saltar al contenido principal

Sony ICFC1T alarm clock/radio is manufactured so that in the event of a power outage, you have the peace of mind that your device will continue working so you never miss an event.

Preguntas 15 Ver todo

12:00 AM keeps flickering after battery drained and replaced

My alarm was showing low battery and it went dead for a couple of days. After I have replaced the batteries (tried many of them) it came back to life (radio works fine) but neither the clock or the alarm work. Whenever I plug it into the wall it starts flickering 12:00 AM and doesn't give me the options to set the time. Can anyone please help?

Thank you!

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

1 Respuesta

Solución Elegida

Hi,

Try the following and see if it helps.

1. Remove the AC cord from the wall outlet.

2. Remove the battery from the clock/radio.

3. Press and hold the Time Zone button for approximately 15 seconds then release.

4. Connect the AC cord to the wall outlet and turn on.

5. Insert the battery back into the battery compartment. (ensure that the +ve mark on the battery is facing up)

6. Press the Radio button to remove the low battery symbol being displayed.

Hopefully you now can set the time etc.

Fue útil esta respuesta?

Calificación 1

Comentarios:

Thank you so much for your answer but it didn't work :((((

It's still flickering and I am not able to set the time.

por

Agregar un comentario

Añadir tu respuesta

salma shamel estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 5

Últimos 30 Días: 30

Todo El Tiempo: 229