Saltar al contenido principal

Manuales completos de reparación de todas las tabletas portátiles de Apple. Es probable que las reparaciones requieran calor y hacer palanca con cuidado.

Preguntas 5738 Ver todo

Sides Of Touchscreen Work - Top & Bottom Do Not

Hello All -

Recently, my wife dropped her iPad in the bathtub. I tried many things to get it working again including the rice method, but eventually had to dissasemble it to dry it out.

I did so and placed the two halves against a fan for 24 hours to dry. This morning, I reassembled it and started it up.

Everything seemed to work great and the moisture in the screen was gone too. The only problem was that the touchscreen would let me "slide to unlock" when turned horizontal, but would not respond to touches when vertical. The middle of the screen was not working either as I use a passcode which I could not enter.

I know it was either moisture or something I did wrong opening it, but don't know what. The only thing that I can see that may be bad is it looks like I may have nicked the digitizer cable. (Screenshots below) Before wasting $100, I wanted to check here first and see if anyone had suggestions. Maybe it should go under the fan again? - Thanks!

Block Image

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

Yes, cutting the digitizer cable like that will cause the failure you describe (part of the screen doesn't respond to touch). Unfortunately, you have no choice but to replace the touch panel/digitizer assembly.

Imagen de iPad Front Panel Digitizer Assembly

Producto

iPad Front Panel Digitizer Assembly

$59.99

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Ben Kellermann estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 2,534