Rep: 1
1
Hi,
I have replaced the Airport B/G AR5BXB6 on my Snow Leopard install with a BMC94312MC 11n card.
Network Info says I have b/g/n but System Profiler reports PHY modes b/g only.
I do not seem to get a 11n connection to my wireless N access point??
Es esta una buena pregunta?
Rep: 78.2mil
385
96
162
According to Mactracker your computer does not list a capability for n. I'm thinking that perhaps your logic board won't allow the connection. Ralph
Fue útil esta respuesta?
Rep: 116.3mil
66
68
359
Only core 2 duo logic board supports wireless -n.
N.
Fue útil esta respuesta?
Use Network Utility first tab, and look at the different network ports to see if -n is working.
That is incorrect. I have a Core Duo 2 GHz and I can see the PHY modes b/g/n with that card. I must mention that I have an airport extreme base station.
I found some info here : http://store.apple.com/us/product/D4141Z... may be you need an enabler update separately in case you dont have airport extreme.
Hope this helps.
Fue útil esta respuesta?
Rep: 2.3mil
16
4
1
You need to run the enabler, Sold from Apple you can probably find it free somewhere, I know my 802.11n upgrade card came with the cd.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 954
