Saltar al contenido principal

Guías de reparación y soporte para ensamblajes de secadora y lavadoras así como también unidades apiladas.

Preguntas 137 Ver todo

Why is the dryer making a horrible noise

I have a frigidaire combo washer dryer, that is a few years old but hasn't been used a lot. The dryer developed a really bad sound metal on metal type scraping. When I looked inside the dryer I noticed there were two screws (out of 3) that had worked their way out of the center back (inside the dryer). Not sure if those screws were the cause of the noise or the result of it. I haven't tried doing towards fixing it for fear of making it worse.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
1 comentario

@theresatay what model is your combo and try to post some images of whast you see with your question. For that use this guide Agregar imágenes a una pregunta existente It will allow us to see what you see and we wont have to guess.

- de

Agregar un comentario

1 Respuesta

Solución Elegida

Theresa, The 2 of the 3 screws that you have found may be the screws that hold the drum centered in the machine on the drums hub shaft. If you or a friend can reinsert and tighten the screws, do it and try machine.

If you put the screw/bolt in the hole and it just spins, this probably means that this fastener wash installed as a nut, lock washer and bolt to drum hub. In this case the machine will have to be disassembled and you may want to have a technician have a look and estimate repair. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Is there directions on doing it yourself?

- de

Agregar un comentario

Añadir tu respuesta

Theresa Taylor estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 33

Todo El Tiempo: 2,070