Saltar al contenido principal

Procesador Core Duo de 1.83, 2 o 2.16 GHz

Preguntas 281 Ver todo
Pregunta Cerrada

Installed as directed, but connection drops & signal strength is low

I purchased this part from your company. I installed this correctly on my A1150 and am running Snow Leopard 10.6.4. My network utility showed that N was available and I'm able to connect to the net. I also install all relevant updates from the apple website.

I'm am experiencing regular drop outs and have to turn Airport on/off regularly to connect the to the net for short periods of time. When it is working, the signal strength fluctuate from high levels to low levels until I turn airport on/off.

I have scoured your site for an answer and have found nothing. Please help me.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

Mind telling us which part you installed?

- de

Probably the wireless card since it's one of the tags.

- de

Agregar un comentario

1 Respuesta

Solución Elegida

Check your

wireless router's setup. The N-Transmission Rate, Beacon Interval, DTIM Interval, Fragmentation Threshold, RTS Threshold could be set poorly. Default settings are fine for most situations, but some changing of settings even simply the broadcast channel might make a difference, especially in an environment with heavy 802.11b traffic.

Other devices or emissions emitting hardware nearby could interfere. (I have seen old TVs, radios and cordless phones interfere with wireless networks).

Remember to return and mark accepted the answer that best solves your problem.

Good luck,

N

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,139