Saltar al contenido principal

Repair and troubleshooting information for the Suzuki FA50 Moped.

Preguntas 75 Ver todo

My moped dies when I am not constantly turning the throttle.

I am new to working on my moped so any help would be appreciated, i also have more questions but this one is my main concern.

So i can start the moped no problem its a little rusty but in order to keep it running i have to have the throttle turned a bit, is that normal?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

Sounds like you might need to adjust the idle.

Try adjusting these two screws and see if you can get it to idle without hitting the throttle.

Block Image

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario
Respuesta Más Útil

Chase as Randy C. suggested try the idle mixture screws first, if that does not do the trick, the carburetor will probably have to come apart and be clean/rebuild.

I hope this helped you out, if so let me know by pressing the helpful button.

Fue útil esta respuesta?

Puntuación 4

1 comentario:

Also check that the gasket is sealing(no vacuum leak)base of carb. to intake on cylinder,

- de

Agregar un comentario

Añadir tu respuesta

chase estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 28

Todo El Tiempo: 6,999