Saltar al contenido principal

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2375 Ver todo

After replacing the front display the phone will not turn on

I have replaced the front display of this iPhone 4 and now it is not working. It will not charge and as I brought this on ebay, I have no previous history.

I have used a multi meter on the battery port and this shows no continuous circuit.

However, is this just a case of replacing the logic board and if so, why does the Europe shop not sell any (lol)?

Is there anything else I can check or do?

Update (08/02/2016)

I have further tested the l3 and l4 power fuses on the logic board (below the dock connector) and one of them has a continuous circuit and the other has not. So I guess I need a new board.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1

1 comentario:

Why not try or get someone else to replace the fuse rather than buy a new logic board? This is a cheaper solution and is worthwhile doing.

After all, it's just a fuse so it's worth a try. But the question comes into mind, what blew the fuse firstly?

- de

Agregar un comentario

1 Respuesta

sound like you have been mugged over by the seller on ebay.

i would either get the fuse repaired or buy another defect phone from ebay ( checking out the buyer rating etc ) and then replace mainboard

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Paul Mullins estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 48