Saltar al contenido principal

The 2008-2012 Ford Escape features a revised front and rear fascia and restyled LED tail lamps.

Preguntas 30 Ver todo

brakes what is the bleeding sequence

What is the sequence to bleeding brakes on my 2012 Xscape it is not a hybrid

Contestar esta pregunta I have this problem too

Is this a good question?

Puntuación 1

Comentarios:

I dont know the sequence on bleeding the brakes on a 2007 Ford fusion

by

Añadir un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

3 Respuestas

Most Helpful Answer

It's fairly easy to bleed brakes. First, have someone pump the brake pedal until the pedal won't pressurize any more. When the brakes stop pressurizing, have the person in the car hold the brake pedal down to the floor. While the brake pedal is being held down, someone will need to crawl under the car and crack the valve allowing the fluid to flow out of the valve. Repeat the process until the brake pedal gets firm. Proceed to the other wheels and repeat the process.

¿Ha sido útil esta respuesta?

Puntuación 1
Añadir un comentario

Start your bleeding process just as stated over ..just make sure you start with the wheel furtherest from the master cylinder which would be you right rear then left rear then right front and finally your left front

¿Ha sido útil esta respuesta?

Puntuación 0
Añadir un comentario

Some of the new cars have a criss-cross braking system. You have to pump and hold the brake, then open the right rear bleed nut, then the left front, and so on. watch for sputtering. That's air coming out. Also, make sure the" pumper" person keeps the pedal down while the bleeder is open.

¿Ha sido útil esta respuesta?

Puntuación 0
Añadir un comentario

Add your answer

Tony black will be eternally grateful.
Ver Estadísticas:

Past 24 Hours: 8

Past 7 Days: 59

Past 30 Days: 297

Global: 7,252