Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Nintendo handheld device released February 2011, identified by model number CTR-001.

Preguntas 386 Ver todo

Nintendo 3DS Camera repair


I replaced the button sticker of the console due to a problem I had with the buttons and that went perfectly. However, in the process, I teared the camera flex cable a bit and now the back camera doesn't work, it stays on black, doesn't freeze the console.

I guess due to a health problem I have for some time my head isn't where it has to be since it's the first time I tear a flex cable

Replacing the cameras is a bit more difficult, althought for me the most difficult part would be being able to put the screen back without any dust particle inside. Which has been always a pain for me. Is there any other way?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3
Agregar un comentario

1 Respuesta

Solución Elegida

Sadly, there is no other way to replace the camera ribbon than tearing the whole system apart.

Make sure you have a can of condensed air and follow the teardown guide in order to get at the camera ribbon to replace it and get your system completely fixed.

Nintendo 3DS Teardown

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Alberto estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 11

Ultimos 30 días: 47

Todo El Tiempo: 3,061