Released June 2012, Model A1278. Intel processor with Turbo Boost, Up to 512 MB DDR5 Video RAM

Preguntas 1009 Ver todo

No Wifi hardware installed after iFixIt screen replacement

I have ordered two screens, both separate orders from iFixit for screen replacements for the 2012 Apple Macbook Pro 13"... each time, I replace the screen and I receive the "No Wifi Hardware Installed" icon. When I put the broken screen back on, the wifi works normally.

I have reinstalled the operating systems with no luck...

Any suggestions?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1


Hi, did you ever find a fix? I'm having the exact same issue.


Travis I'm thinking the OP either mis ID'd his system or in fact the ribbon cable was bad. If you review Step7 in this IFIXIT guide: MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Board Replacement and here's the needed part MacBook Pro 13" Unibody (Early 2011/Late 2011/Mid 2012) Airport/Bluetooth Cable - Apple P/N 922-9780


Agregar un comentario

2 Respuestas

Respuesta Más Útil

Agreed, makes no sense! The Clutch cover in this series only has the WiFi & Bluetooth antennas. Are you sure you have this model? As an example, this model has the AirPort board is in the clutch cover: MacBook Pro 13" Unibody Mid 2009 AirPort Card Replacement

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

This is weird. Are you sure you properly plugged the airport/bluetooth daughter board with the new screen?

Step 5: MacBook Pro 13" Unibody Mid 2012 Display Replacement

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

East Marshall IT Dept estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 85