Rep: 514
9
5
1
When i plug in my camera, the cord does not register within the camera to start charging. When it does connect, it says that the battery is fully charged, but when I unplug it, the camera dies. Help?
Es esta una buena pregunta?
Rep: 643
13
2
1
i would suggest completely removing the battery and hold down the power button for 30 seconds to completely drain power from the camera. Then replace the battery. If this does not help, your motherboard charging port may be defective. For replacement follow our Motherboard Replacement Guide.
Fue útil esta respuesta?
It WAS an idea but mine would not completley discharge..
my camera will not charge pass 5% please advise what I can do
Fue útil esta respuesta?
Hi dears
I working very hard until Ihve mony for buy samsung galexy camera Ek_GC.100
My Samsung camera EK_GC.100 batry didn't charge and don't conected flash memory . Custameler change soket sharj on the mein bord ( USB.) but when connected adaptor ,mein bord get very hot ( internal memory on the main bord ) and lcd display logo batry red very hot , and under logo writing very hot .I torn off mobail.
but never turn on that ,and
don't logo batry charg .batry geted full charge but mobail don't turn on and ,do not logo charge in lcd
Sorry I can speak
einglish but only a littel
Please help me .becase and
I dont mony for buy a another new mobail
Very very Thank you
Ultimas 24 horas: 1
Ultimos 7 días: 1
Ultimos 30 días: 4
Todo El Tiempo: 2,510
