Repara tus cosas Comunidad Tienda

Modelo A1286. Lanzado en febrero de 2011 / 2.0, 2.2 o 2.3 GHz Procesador Intel Core i7 de cuatro núcleos

Preguntas 586 Ver todo
Pregunta Cerrada

Opciones

Screen connector replacement or screen assembly or logic board

Hi

My friends MacBook display stopped working a while back (still displays on external)

he took it to a repair shop and they reported that it need a new display assembly.

now I opened it and when I put it back together it was working but as soon as it got moved or had any vibration it would stop.

so I can clearly see the screen works and the output of the logic board seems fine.

what my main question is can I just replace the display connector?

or does it have to be the display assembly?

thanks alex

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

You'll need a heat gun to remove the glass. It obviously works but may or may not be the cable. Make sure the contacts and receiving port are clear and no corrosion on the contacts ob the display data cable.

Before doing this, please take it to an ASP and have it tested for this issue (free) and very possibly your solution:

https://www.apple.com/support/macbookpro...

The check your coverage link only identifies your machine, not your coverage for this issue.

Fue útil esta respuesta?

Sí No
Puntuación 3

2 comentarios:

ok thanks it seems to be the cable as I had the bottom of the mac off and was "playing" with the cable and the screen was on and off

- de

Just an update

Whilst I was inspecting the screen connection I saw that the screen cable had 2 wires that look like that had a internal brake

So I cut a small section out and soldered it

It seems to of fixed the problem

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 466