Repara tus cosas Comunidad Tienda

Anunciado el 9 de septiembre de 2015, el iPad Mini 4 mantiene la potencia de un iPad Air 2 en un factor de forma más pequeño.

Preguntas 174 Ver todo

Opciones

Home Button Ipad Mini 4 Pinout? Wiring Diagram?

I am looking for a pinout for my Ipad Mini 4. I got a new screen/digitizer and it did not come with a home button. Old one is gone (my bad). So I am trying to figure out if the Ipad Mini 3 home button MAY work but I don't think it will directly. Is there perhaps a way I can wire one up? I don't need the fingerprint scanner to work just a simple home button. Does anyone have a pinout for this thing. Thanks

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

If you don't have the original home button do not restore or update your iPad because you will get error 53 and your iPad will be bricked by Apple.

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

hi. i had this same problem. i wanted to fix an ipad mini 3, (careless of touch id working) the home button flex was ripped apart and had no connector end any more. just the original home button end (included button itself).

using a mutimeter located the two pins that activate the button on the flex. ( second and third on the side nearer to the home button)

once i had those i was able to solder thin wires .

what i thought was the hardest part, it became the easiest (the motherboard side) i remember, on ipad and ipad 2 and ipad mini. home button sense is just GROUND !!! so i grounded the first pin from the home button connector on the motherboard and it worked!!! this is the first pin closer to the battery connector.

which it means you just need to run a wire from there to home button and the other pin from home button to GROUND :) so when you push the home button just GROUNDS that pin.

i have pics that i cant paste here. but please emailme to: smartphones@hotmail.com

Rafael

be glad to help

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Thanks for the info, I had a client which was a worker from another repair shop that bring a iPad Mini 3 home button cable which they ripped unfortunately at the home button flex side. This helped a lot.

Decided to use some thicker wire and solder directly on home button assembly flex and not ground to motherboard. Whatever works I guess.

- de

Agregar un comentario

Opciones

The iPad mini 3 home button is soldered onto the flex cable. If you don't have soldering skills I would recommend purchasing a screen with the home button pre installed. The Touch ID will not work anymore. If you get a error 53 when updating install latest update on iTunes, Aplle just released the update today...

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Kyle B estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 13

Todo El Tiempo: 1,199