Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

Preguntas 1467 Ver todo

iPhone 6s Screen Wont Stay Powered after Replacement.

I have professionally replaced (litereally) hundreds of iPhone 6 and 5s Assemblies and LCDs however after replacing my first 6s with an OEM assembly I clicked the power button and the screen showed up perfectly then dissappeard an will not power back on.

I have replaced the screen

I have replaced the button

I have installed with the battery disconnected

I am using all the original cables and buttons

I have tried soft resetting

This phone connects to iTunes perfectly and periodically i can click the side or power button and see the screen for a split second again before it turns back off and wont power again.

Please Help!

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

1 Respuesta

Solución Elegida

Have you tried putting the old screen back on, to rule out the new screen being an issue?

Fue útil esta respuesta?

Calificación 1

Comentarios:

Old screen is destroyed. Have attempted with two brand new assemblies no luck with either.

por

The only thing that I can think of, is the LCD socket on the logic board. I'm starting to guess, it's a logic board problem. Which you could seek out the iPad rehab people. They're very good, and have a mail in service. The owner, Jessa Bethany, contributes on this site, and you could potentially ask her about it. She'd probably know better than me

por

Agregar un comentario

Añadir tu respuesta

Cellflo Sebring estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 160