Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1158 Ver todo

iPhone won't turn on

So I had a friend that dropped his phone in a pool and I put in a new logic board and battery. The phone worked fine, since all damaged parts were removed. Then one day I shut it off, and it wouldn't turn on. I lifted the logic board off the battery, put it back on, and it booted up fine. Now I turned it off again, and even after lifting the connectors apart, it still won't turn back on. Any suggestions on anything I should try?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

If you can't get it to turn on by plugging the USB cable into your computer, you need to replace the dock connector.

Imagen de iPhone 3G Dock Connector

Producto

iPhone 3G Dock Connector

$9.99

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Neil estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,009