Saltar al contenido principal

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

Preguntas 256 Ver todo

New Digitizer Not Functioning Properly After Repair

I have replaced my front digitizer per all instructions and even some advanced research and everything looks to be perfect, triple checked connections and adhesives. If I close the screen almost to the point of being fully secure the bezel everything works fine, full functionality. As soon as I apply pressure to panel to be fully secured with ipad bezel, it will continually function as if something is applying pressure to the front side of the screen as if someone is continually typing but they are not and it will just continue making the ipad unusable. I have triple checked any touch points on the back, but the copper portion of the backside of the screen will inevitably touch the rubber padding. Not sure what else to do.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

1 Respuesta

As a last effort, before attempting a new digitizer, try applying Kapton Tape along the edges of the inside of the digitizer, over the copper.

I've heard of this helping with these 'ghost touches' you're experiencing. Good luck!

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Frank Carzo estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 75