Saltar al contenido principal

A tablet released by Hisense in 2014, identified by model number E2281.

Preguntas 36 Ver todo

How do I replace the broken digitizer on my Hisesnse Sero 8?

(I'm a first-timer here).

Hello everyone, I dropped my Sero 8 tablet from desk height (cracking the digitizer in the process). When I turn it on, I can see my lock screen clearly (therefore the LCD must be fine), but the digitizer doesn't pick up input anywhere on the screen.

I think I know how to remove the broken digitizer, but how do I put on a new one?

And could someone provide a summary of removing the digitizer for the Sero 8 just so I can be sure I know how to do it?

What tools do I need? What tools would be useful but not essential? I know I need a blow dryer, and dinky little screwdrivers (what kind/size though?), some things to pry the screen off (and some things to put between the digitizer and the LCD prevent the adhesive from re-adhering)...

Anyone have recommendations for what I buy?



Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
5 comentarios

Someone please help me! I don't know what to do!

- de


I can't find any info about a Sero 8 digitizer replacement procedure. Here is a link which shows how to do a Sero 7 Pro digitizer replacement. It may be of some help, no guarantees that the Sero 8 will be the same. The disclaimer states that it is NOT an easy repair. Your decision.

- de

anyone else got some info?

- de

Alright, I'm buying another tablet.

- de

Well, I’ll be planning on repairing this same device in the future and show details in years.

- de

Agregar un comentario

2 Respuestas

Respuesta Más Útil

It would be great if you could contribute a screen replacement to the existing guides for this model. The current guides serve as a good reference point and the several youtuve videos for the Sero 7 can supplement any areas you may be concerned about.

Hisense Sero 7 Pro glass only screen repair as recommended by @jayeff

Hisense E270BSA - Digiter / Front Glass Replacement - Instructional Video

Hisense Sero 7 Pro Tablet Part 2 Taken Apart

As far as the tools you would need, those shown in the first video were:

Set of Picks

[producto vinculado inexistente o deshabilitado: IF145-000]


Tweezers - Pro / ESD / Blunt

Double-sided adhesive tape

Philips and flat head screw drivers

The links for the tools are those on iFixit for easy reference, but you can source these locally as well.

Since your current digitizer is broken, I recommend that you use packaging tape over the existing cracked digitizer to minimize small parts from breaking off. This may make it possible to remove it as one piece.

Imagen de Spudger




Imagen de Tweezers




Imagen de iFixit Opening Picks (Set of 6)


iFixit Opening Picks (Set of 6)


Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Look on google it normally gives a dismantle process of most things

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Charlie estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 1,105