Saltar al contenido principal

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying.

Preguntas 952 Ver todo

LCD screen goes black immediately after turning on

The iPad was brought in because the customer thought the charging port was bad, i plugged it in and it charged up. When you power on the device it comes up to the apple logo and then comes to their home screen, within a few seconds the screen goes black, if you press the home button and power button quickly ( not hard reset ) the screen will light up and then goes right back to black. iPad is still on because when we plug it into the computer it shows it connected. We have already tried the following and still having the same result. has anyone seen this before?

We have tried:

New LCD

New Power switch

New charging port

I don't think it would be a battery issue because the device isn't shutting completely off. every now and then when you press the power button and home button it will do a soft reset.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0

Comentarios:

could it possible be the magnets on the side? they don't have a smart cover or anything but could that be the issue possible?

por

Agregar un comentario

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

1 Respuesta

I have an iPad 2 here that will boot up , the apple logo comes on, then disppears. About a minute later the home screen will appear and it functions as normal. Is it possible that you may need to wait a minute or so after booting the customers iPad?

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

chad estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 70