Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

The Xbox 360 is the second game console made by Microsoft, and was released November 22, 2005.

Preguntas 432 Ver todo

Why wont my 360 read discs?

I tripped over the ethernet cord attached to my 360 and it took a 3-foot dive. Now it wont read discs. Everything else seems to work fine and I can hear the discs start to spin, but after about two seconds it stops and the dashboard says open tray. I would rather avoid opening it up but if thats what it takes then so be it. Any help would be greatly appreciated.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits para Nintendo Switch

Una solución rápida para volver al juego

Comprar kits de Switch

Kits para Nintendo Switch

Una solución rápida para volver al juego

Comprar kits de Switch

1 Respuesta

Respuesta Más Útil

The laser most likely is jammed in the back of the drive. This is a common thing we see when the systems are dropped. Just open up the system and realign the drive. While you are in there, give it a good cleaning. The drive should be dust free. The railing that the laser guides on, make sure that it is clean and well lubricated with gear grease of some sort.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Timothy estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,778