iMac.s Internal Display not working, External does.

Question

iMac Intel 21.5" EMC 2389

Modelo A1311 / mediados de 2010 / 3.06 y procesador Core i3 de 3.2 GHz o procesador Core i5 de 3.6 GHz

Preguntas 342 Ver todo

kamal kant Mehandiratta @kamalkantm20960

Rep: 25

2

Publicado: 19 de nov. de 2015

Opciones

iMac.s Internal Display not working, External does.

Internal Display not working, External does.

Hi, I have read a lot about this issue and have done some of the things to rectify this issue but could not resolve this.

First, When I power on the Imac, I can hear chime, Hard drive and fan noise, Three led are lit on the logic board, while fourth remains off. I checked by changing Graphics Card, Inverter Board, Power Supply and lvds connector, and even LED. But still not able to see anything on internal LED while when I connect External monitor, I can use it as a normal mac.

Please help, What can be the issue.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 2

2 comentarios:

First couple of troubleshooting questions are: Have you done either a PRAM reset or an SMC reset?

3 de dic. de 2015 - de Shmajay

See if you can discern the desktop with a flashlight.

4 de dic. de 2015 - de mayer

Agregar un comentario

2 Respuestas

First couple of troubleshooting questions are: Have you done either a PRAM reset or an SMC reset? — Shmajay

kekemeke godspower @kekemekego15265 Rep: 43 3 · Answer 1 · 2015-12-04T08:25:39-07:00

this is a very popular problem caused by different issues, one of the following solutions might work for you

lets start with the basics

basically the first thing you might want to do is changing the graphics card and if that doesn't work , you can try the following methods

1. have you wondered if the problem is with the screen and not the cables?

2. also consider that it might be the iMac's display mode that's not configured properly.

3. the problem might lie with the SMC , and if thats the case you, you should read more about it here. its a topic on how to reset your mac's smc http://www.macissues.com/2014/04/11/when...

4. if all those options fail, you might have to replace the motherboard itself and if that also fails..... you will have to take it back to the store and use your warranty