Repara tus cosas Comunidad Tienda

Modelo A1224 / mediados de 2007 y principios de 2008/2, 2,4, o 2,66 GHz Procesador Core 2 Duo

Preguntas 549 Ver todo

Opciones

No Power, #1 LED Stays lit, #'s 2&3 LED's flash

I have an Intel iMac 20", Model A1224, 1gb RAM, that one day just stopped turning on. I opened it up and checked the diagnostic LED's on the board. #1 stays lit. #2 and #3 blink on and off. #4 doesn't light up at all.

When I press the power button on the back of the black, plastic case, the internal fans will attempt to spin, but will not spin. (They rotate *maybe* one (1) degree out of the 360 degrees they would spin.) I can hear a high-pitched sound--kinda like a whirring sound--coming from the power supply when this occurs.

I have attempted to reset the SMC with, seemingly, no effect.

Any advice would be much appreciated.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 3
1 comentario

I have the same exact issue. Replaced the power supply and 2&3 are still flashing. Did you find out the problem?

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

The blinking indicates a RAM problem. First reseat the RAM. If that fails try one stick at a time in each of the slots.

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

Excellent low cost suggestion. +

- de

Agregar un comentario

Opciones

Seems that the power supply has gone. #1 LED indicates trickle power, it's always on when the computer is plugged in and supplies 5V to the logic board. Whe #2 and#3 are blinking it means that CPU and GPU can't be initialized. Usually a (don't know the english term for it, i try ;-)) power store diode is gone on the power supply. You can check it but be careful. Leave the machine unplugged for at least 24H cause the capacitors can store a lot of voltage.

Good luck.

Fue útil esta respuesta?

Sí No
Puntuación 1

2 comentarios:

Installed a new Power Supply. #2 and #3 LED's are still blinking. Any other thoughts? Thanks.

- de

I have the same problem. I also changed power supply and the problem still there. Any answer?

- de

Agregar un comentario

Añadir tu respuesta

Plumberman010 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 18

Ultimos 30 días: 20

Todo El Tiempo: 3,124