Repara tus cosas Comunidad Tienda

Versión actualizada del iPad 2 original, lanzado en marzo de 2012 con un procesador de troquel más pequeño y una construcción interna actualizada. La reparación requerirá el uso de calor y palanca cuidadosa.

Preguntas 73 Ver todo
Pregunta Cerrada

Opciones

New Screen Cover Not Sticking

Hi, I replaced the volume/audio ribbon and dock connector in my iPad2. After finishing everything and putting the new glass cover, everything worked great, looked great, was happy. But I noticed that after a short while, the edge of the glass cover is peeling off and separating from the edges (pic).

Block Image

The new screen had pre-applied 3M 300LSE tape. I really don't want to risk removing the screen and breaking it... what are my options?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

That tape is useless try using this instead Red Tape you wont break the screen if you use that 3M 300LSE tape you applied use a heat gun to remove the screen you will be fine.

Fue útil esta respuesta?

Sí No
Puntuación 2

2 comentarios:

Thanks for this. Will try to find locally, not sure if I can. All these shipping charges and exchange rates is adding up!

- de

Finally got the 5mm red tape. I didn't need to use the heat gun to remove the screen, it popped right out (that adhesive was very cheap indeed). Applied the red tape, left overnight and glass was still as it should this morning. Winner. Smartcover sensor not working, but I can do without.

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 122