Repara tus cosas Comunidad Tienda

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1158 Ver todo

Opciones

How to recognise 3GS from 3G display?

I bought a replacement LCD for my 3G, but instead of seeing anything, I see just horizontal and vertical lines (while the phone 100% runs, I hear ringing, I can connect to iTunes...).

Plus, while the connector is very similar, it doesn't hold very much on the logic board and if I move a little with the display, the cable is out.

My first LCD still works on the same phone, but with no backlight. (which was the reason why I wanted to replace it)

My suspicion is they sent me 3GS instead of 3G LCD. Is there any way to tell them apart?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

The ZIF connector of the 3G and 3GS displays are different. The connector for the 3G has a small plastic rectangular piece in the center of it while the 3GS does not.

If you look at this photo of a 3G display, the connector has no piece of plastic in the center of it.

This picture of a 3GS display shows the rectangular piece of plastic in the center of the ZIF connector.

Fue útil esta respuesta?

Sí No
Puntuación 1

6 comentarios:

hm... so it seems I really have 3G....

I made a picture to be sure - http://imgur.com/t7WG4.jpg - your answer would imply it's 3G.

- de

That is a 3G connector

- de

Oh, OK. So, either the display itself is faulty, or I destroyed it somehow while maneuvering with it. How easy is to break LCD while sticking it to the construction and then putting it to iPhone? I think I was extra careful (I know, it's probably for another question)

- de

Look for a bent, gold lead on the logic board. Bent leads can cause problems with displays. The connector on the panel itself looks like it is intact judging from the picture you posted. If everything looks ok, then contact iFixit customer support (support@ifixit.com) and we can set up a return for you and get a new panel out to you. Reference this Answer in your email.

- de

The LCD was not bought on iFixit, you don't send to my country (Czech Republic) :-( or, at least, didn't when I last checked.

- de

Mostrar 1 comentario más

Agregar un comentario

Añadir tu respuesta

karel b estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,752