Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Este Power Mac G4 tiene puertas de unidad de espejo.

Preguntas 98 Ver todo

Hard-drive not spinning up at ATA100. Need new LogicBoard?

Hello everyone,

I've got a MDD (DP 867 / 133MHz FSB) with a harddisk not spinning up when connected to the ATA-100 port. At the ATA-66 it spins up , but no target disk function / no boot up. When placed into an external hard-drive bay it works fine.

LogicBoard issue ?

If so ..

May it be possible to fit a FW800 LogicBoard (1474a) into a MDD with an installed LogicBoard "820 - 1380-A" ? Cutting out that port being compulsory . Are there compatible LogicBoards to fit in (eg. 820-1453a)?

Regards Jan.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

Supplemental.

The system does seem to not respond to ANY inputs from keyboard, caps lock not working, fans speed up, heat-sink get warm after some time.

- de

Agregar un comentario

Kit de Destornilladores Manta

112 bits for every fix.

Upgrade Your Toolbox

Kit de Destornilladores Manta

Upgrade Your Toolbox

2 Respuestas

Solución Elegida

Try double checking and exchanging the HD ribbon cables.

Fue útil esta respuesta?

Puntuación 1

Comentarios:

Good to see you back. +

- de

Thanks for your reply !

No change at all .. tried all ATA ports - disk spins up on the 33 and 66 ATA channel, and remains silent on the ATA 100. It even starts when cable is unplugged while the computer is running.

- de

Will it start up from the optical drive? Insert disk & hold down "C" key. I have two of the dual 1.42. logic board 630-4643

- de

I found some good prices here: http://macbookfreak.com/mdd-motherboard-...

- de

I thought about this one >> http://cgi.ebay.com/ws/eBayISAPI.dll?Vie... <<

are all the boards (FW400) compatible to the 820-1308a? Do you've got a spare board for me?

- de

Agregar un comentario

All the mentioned steps would be helpful if only ribbon cable / harddrive or PMU error where present. This is obviously not the case here.

Closed.

Thanks for you contributions, much appreciated .

Jan.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Jan Bernert estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,202