Are the FPC connectors the same part for both digitizer and lcd? I see the footprint on the logic board are the exact same layout. I see the digitizer takes 2 connectors while the lcd takes one but can you use the same part.
Es esta una buena pregunta?
Rep: 781.7mil
1.1mil
893
2.3mil
Synth, no you can not. The digitizer uses a Molex 502250-8037 (37 circuits) and the LCD requires a Molex 502250-8051 (51circuits). The digitizer and audio jack connector are identical. Check Molex.com for datasheets.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 88
