Saltar al contenido principal

iMac Intel 27 "EMC 2309 (Finales de 2009, Core 2 Duo 3.06 o 3.33 GHz) ID iMac10,1, EMC 2374 (Finales de 2009, Core i5 2.66 GHz o Core i7 2.8 GHz) ID iMac11,1

Preguntas 456 Ver todo

How to fix ethernet plug recognition?

Hello,

When I plug an ethernet wire (plugged to a switch with a printer, wifi access point, etc) the network is not recognized. On the Network configuration, the Ethernet dot is still red. And on the switch, the lignt in front of the Quad Core iMac line is off... I used several wires, the several ports of the switch, but nothing...

Under Mac OS X 10.6.4 I see the en0 device, under Windows 7, I see the Broadcom card (but still unconnected) and everything seems alright... Except that when I plug it does nothing...

Any idea ?

Thanks in advance,

And sorry for my poor english.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

2 Respuestas

Solución Elegida

either the nic on your mac is bad or your switch is bad.

if the port that your printer is plugged into is working try plugging your mac into that port.

If it still does not work and your sure your cable is good then your nic is faulty.

Fue útil esta respuesta?

Puntuación 1

Comentarios:

what's a nic?

- de

Hi Richard--network interface card--a windows device primarily. Ralph

- de

Well, it seems that the nic is dead... Well, what now... Can I change it myself, or is it included on the motherboard ?

- de

Agregar un comentario
Respuesta Más Útil

If this is indeed a Late 2009 machine, it's still covered under warranty and Apple will repair it for free.

Fue útil esta respuesta?

Puntuación 2

Comentarios:

Thanks for the tip...

- de

Agregar un comentario

Añadir tu respuesta

Matthias Lamoureux estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,229