Some carts only display in black & white

Hello - I have a 2600A 4-switch "Woody" that I have been fighting with this issue for a month, hoping someone can help steer me in the right direction.

Basically, any cartridge that supports the black & white switch is forced to B&W mode, regardless of the switch position. I have taken apart the switch and checked the contacts, all looks good. I heated up the solder joints on the PCB for the switch, the TIA, and the 6507, no change. I even unseated the TIA and 6507 from their sockets and cleaned the pins & contacts before reinstalling, still no change.

Game carts like Ms Pac Man, where Atari stopped supporting the B&W mode switch, display in color like they are supposed to.

Activision's Starmaster does not switch to the map display when the switch is activated, even if I short the switch posts to closed position for B&W mode.

This issue was present when connected via RF, and has persisted despite modding the unit for component video.

Any advice?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario