RESUELTO:water damage corroded resistor iPhone 5s - iPhone 5s

water damage corroded resistor iPhone 5s

I dropped my phone in the sea, i cleaned it with iso alcohol and it came to life but no screen, it connects to pc fine, i removed the shield from the logic board and found alot of corrosion, i cleaned best i could and a resistor fell off, it was the only resistor with corrosion so i am wondering if i can fix this myself, also i have damaged a plastic part with the letter 'L' it has copper wire inside

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 2

Publicado: 19 de jun. de 2015

Opciones

felony01, the "plastic part with the letter 'L'" as well as the other part are both coils (inductors). The "plastic" one is L3 which is a 22UH-20%-0.38A-0.876OHM VLF302510T-SM coil. L19 is a 1.5UH 1.6A 0.13OHM MAKK2016 inductor.

Fue útil esta respuesta?

Sí No

Puntuación 3

2 comentarios:

oldturkey03, Thanks for the reply, do you know where i can purchase them?

can i use circuit breaker instead?

22 de jun. de 2015 - de felony01

I'd try Digikey.com or Mouser.com. No, you can't substitute for those.

22 de jun. de 2015 - de oldturkey03

Agregar un comentario

iPhone 5s

water damage corroded resistor iPhone 5s

1 Respuesta

Añadir tu respuesta