Opciones

What is the black substance around components On logicboard

Hi. I was just trying to reball an ic but when trying to remove it from the board I noticed this black adhesive/cement stuff around it?

Is there a way to remove this?

I have tried the heat gun at max temperature but this did not soften it?

This is my first board repair and am using a dead board to practice on so not worried about the board.

Thank you

Update.

I used a bit of force and the ic came off but also took a pad with it.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

Publicado: 18 de jun. de 2015

Opciones

trevor, sounds like an epoxy underfill. That is to stabilize the IC on a logic board. Add an image of the IC, its location and the damage so we can see what you see. Take a look at this video and see if it explains it.

Fue útil esta respuesta?

Sí No

Puntuación 0

1 comentario:

the video is right. Have been checking online and heat with gentle scraping is the only way to remove it.

Tried taking a photo of the damage but it doesn't come out well in the pics.

It's just one pad under the baseband chip. All the others are intact.

19 de jun. de 2015 - de trevor

Agregar un comentario

iPhone 5s

What is the black substance around components On logicboard

1 Respuesta