iMac 27 mid 2012 Fan blowing at full speed

Question

iMac Intel 27" EMC 2546

Modelo A1419 / Finales de 2012 / Core i5 de 2,9 y 3,2 GHz o Procesador Core i7 de 3,4 GHz, ID iMac13,2

Preguntas 330 Ver todo

andreaslindell @andreaslindell

Rep: 1

Publicado: 8 de jun. de 2015

Opciones

iMac 27 mid 2012 Fan blowing at full speed

Ok, the stand of my Imac broke, so I opened up the Imac myself and replaced it with a new stand. After closing the Imac together, the fan blows at full speed. I have not changed any parts.

I tried to find a solution to the problem. Have done SMC reset and PRAM reset a zillion times, this does not solve the issue.

I have opened up the computer again and tried to see if there was any cables to the fan that wasn't set right, also checked cables to the hard drive.

Any solution or idea? Tried to find something about this, but most solutions seems to cover earlier Imac versions.

Best Regards

Andreas

Hi Dan,

Thanks for your response!

Here comes the screenshot!

Best Regards

Andreas

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

2 Respuestas

Dan @danj Rep: 479mil Self employed contract worker 35 329 970 · Answer 1 · 2015-06-17T14:49:36-07:00

Respuesta Más Útil

Dan @danj

Rep: 479mil

Self employed contract worker

35

329

970

Publicado: 17 de jun. de 2015

Opciones

Lets see if we can identify what sensor is giving you trouble by running this app: Temperature Gauge Pro. Post a screen shot for us to see.

Fue útil esta respuesta?

Sí No

Puntuación 2

9 comentarios:

Added screenshot above! thanks!

18 de jun. de 2015 - de andreaslindell

Did you replace your HD? It appears the drives sensor is not working. This model of iMac requires a special cable adapter when using either a HD or SSD which is not an Apple drive or one that supports the way Apple accesses the drives internal thermal sensor.

18 de jun. de 2015 - de Dan

No haven't changed anything inside but the broken henge/stand. I did actually open it again to see if the cables were loose or not set right, but everything seems to be correct, is it a cable that easily break?

19 de jun. de 2015 - de andreaslindell

Hi Dan,

Here comes a screenshot, it says though that "These sensors appear to be not working properly: Unknown"

Any idea?

Link to screenshot:

http://screenshot.net/3rnpwfw

Thanks!

Andreas

18 de jun. de 2015 - de andreaslindell

What drive do you have in your system? A HD or a SSD, or a Fusion Drive.

19 de jun. de 2015 - de Dan

Mostrar 4 comentarios más